This Mastidek adhesive is designed for use with DEKTON® Aged Timber surfaces. The product is designed for outdoor use and is very strong.
Mastidek Cartridge Glue for Cosentino DEKTON® Aged Timber surfaces is a new generation bi-component resin specifically for gluing DEKTON® surfaces. It is colored so that it matches well with DEKTON® Aged Timber. This 215 ML Mastidek fast outdoor adhesive has a very high adhesion in a short amount of time. This allows installers and fabricators to cut and polish the assembled parts in a short time; approximately 45-60 minutes. Once the adhesive hardens, it is very shiny and is very polishable.
Mastidek for DEKTON® Aged Timber is produced in special cartridges with a 2:1 bi-axial quantity 215 ML. The glue and hardener are pre-dosed in the cartridge. Once the 215 ML glue cartridge is inserted in the proper gun with the special mixer fixed on top, it allows the correct extrusion and mixing of the glue. Mastidek for Aged Timber requires the use of a special dispenser; the M200XMR Cartridge Gun. This glue and gun is suitable for outdoor use.
When using Mastidek adhesive for DEKTON® Aged Timber surfaces, be sure to follow these important guidelines:
The product in the cartridge will last at least 12 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.
Please read the Mastidek safety data sheet before using the adhesive for Aged Timber surfaces and follow the product instructions closely.
The safety data sheet for 215 ML Aged Timber can be viewed and downloaded by clicking the safety data sheet button below:
Technical information for the 215 ML Aged Timber Mastidek Cartridge is available below. For a printable version of the Aged Timber technical information (including the data below) follow the "Printable Tech Sheet" link below the table.