Home > Dekton Glue >

Irok 215 ML DEKTON®


Irok 215 ML Mastidek Outdoor Cartridge Glue for Cosentino DEKTON® Irok Surfaces


 

Distributors With Direct Website Links

Please email us at info@dektonmastidek.com with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 877-315-4761 for assistance. Or, you can find this product online at the following distributor websites:

Our Price: $29.95

Product Code: M3HIROK
Qty:

Description Technical Specs Data Sheets
 

215 ML Irok Mastidek Adhesive for DEKTON® Irok Surfaces

For use in working with DEKTON® Irok surfaces in indoor and outdoor settings.

Mastidek Irok Cartridge Glue for use on Cosentino DEKTON® Irok is a new generation bi-component resin. Mastidek Irok glue has a very high adhesion in a short amount of time which allows for cutting and polishing the assembled parts in approximately 45-60 minutes. The hardened product is very shiny and is very polishable.

Irok is produced in special cartridges with a 2:1 bi-axial quantity 215 ml. The glue and hardener are pre-dosed in the cartridge. Once inserted in the proper gun, with the special mixer fixed on top, the cartridge allows the correct extrusion and mixing of the 2 parts. Irok cartridges require the use of a special M200XMR Cartridge Gun. Irok cartridge glue is suitable for outdoor use.

Directions for Using Irok:

Irok is effective for the intended use only when it is used properly. Please be sure to acquaint yourself with how to use and store the adhesive and how to prepare the surface before use. The directions for using Mastidek Irok are as follows:

  1. Clean all surfaces to remove dust and grease.
  2. For polished or glossy surfaces, scrub the surface with sandpaper before gluing.
  3. Remove cap and attach the special threaded mixing nozzle.
  4. Squeeze out about 6" of product before applying to surface.
  5. Apply the adhesive to the surface being bonded.
  6. Clean the nozzle after use, replace the cap and discard the mixing nozzle.
  7. Repeat steps 3-6 at any change of the mixer.
  8. After usage, clean the nozzle, replace the cap and discard the mixer after.
  9. Product will not set below 32°.

Irok Shelf Life:

The product in the cartridge will last at least 12 months if stored between 65° and 77°. Keep away from sunlight, heat and humidity.

Safety:

Please read the Irok Safety Data Sheet before use and follow the product instructions.


Share your knowledge of this product. Be the first to write a review »