Home > Dekton Blades >

14" Tenax Dekton Blade 350/60

Dekton Blade 14


Distributors With Direct Website Links

Please email us at [email protected] with your company name and zip code. We will put you in contact with the distributor nearest you. You may call as well: 877-315-4761 for assistance. Or, you can find this product online at the following distributor websites:

Our Price: $225.00

Product Code: 4D-42104


14" Tenax Dekton Bridge Saw Blade

Stone fabrication professionals find themselves struggling to cut Dekton® materials because fo their hardness. These surfaces continue to grow in the market and require tools designed to perform well on them. Tenax has designed this 14" diamond blade to effectively cut through the Dekton® surfaces. This 14" Dekton blade from Tenax will enable fabricators to cut Dekton® materials confidentally and will produce a clean straight cut * with minimal chipping during the process.

The Tenax 14" Dekton® blade is approved by Cosentino® and offers technology that provides fabrication professionals the ability get great cutting performance while working Dekton® surfaces. The Dekton® blade is available in the following sizes:

Available Sizes:

  • 14" Dekton Blade
  • 16" Dekton Blade

If you have a fabricator that cuts Cosentino® Dekton® surfaces from 8mm clear up through 30mm, you need to try this blade from Tenax. Here are some of the specifics for the 14" Tenax Dekton Blade:


  1. Designed Specifically for Dekton®
  2. 1800-2100 RPM
  3. Feed Rate/Straight Cut: 16"-60" Per Minute (600-1000mm Per Minute)
  4. Feed Rate/Miter Cut: 14"-32" Per Minute (350-800mm Per Minute)
  5. Standard 2.3mm Core Thickness

Tenax Dekton 14" Blade Rate Table

The following table gives the rates for the 14" Dekton® blade from Tenax:

Dekton® Thickness RPM ∅360 RPM ∅410 RPM ∅460 Feed Speed FT/Minute
8mm 2100-2400 1700-2100 1500-1800 48"-60"
12mm 2100-2400 1700-2100 1500-1800 40"-48"
20mm 2100-2400 1700-2100 1500-1800 24"-40"
30mm 2100-2400 1700-2100 1500-1800 16"-24"

* While entering the cut and exiting the cut, reduce the speed of the feed by 40-50%. While cutting at 45°, reduce the speed of the feed by 40%.

Share your knowledge of this product. Be the first to write a review »