Home > Dekton Blades > Dekton Bridge Saw Blades

Dekton Bridge Saw Blades

Bridge saw blades for cutting DEKTON® must be constructed with specific parameters in mind. Since Ultra-Compact material is so hard, saw blades must be designed for cutting straight and accurate. They also must cut the material with minimal chipping. This provides a cleaner finish on the surface being cut.

For great performance on DEKTON® surfaces, Tenax has designed two bridge saw blades specifically to cut DEKTON® materials. Available in 2 sizes, the Tenax Bridge Saw Blade for DEKTON® provides a great cutting performance.

Why Choose Approved Blades for DEKTON®?

These diamond bridge saw blades are approved by Cosentino for working DEKTON® surfaces. If you are fabricating sintered stone, these blades have the properties to make it perform well for cutting this hard material. Furthermore, tests show that these blades cut with tremendous quality at high speeds. Notice the ratings of the highlighted 14" & 16" blades.

Sort By:
Page of 1

Blade Feed Rates

Dekton® Thickness RPM ∅360 RPM ∅410 RPM ∅460 Feed Speed FT/Minute
8mm 2100-2400 1700-2100 1500-1800 48"-60"
12mm 2100-2400 1700-2100 1500-1800 40"-48"
20mm 2100-2400 1700-2100 1500-1800 24"-40"
30mm 2100-2400 1700-2100 1500-1800 16"-24"

* While entering the cut and exiting the cut, reduce the speed of the feed by 40-50%. While cutting at 45°, reduce the speed of the feed by 40%.